Turn the ignition switch from the OFF position to the ON position 4 times leaving it in the OFF position the fourth
time. The Horn/Siren will beep (1) time. You are now in “On-Board Shock Sensor Adjustment Mode”.
ON
OFF
4X
ON
OFF
5X
Turn the ignition switch from the OFF position to the ON position 5 times leaving it in the OFF position the fifth
time. The Horn/Siren will beep (2) times. You are now in “External Sensor Adjustment Mode”.
On-Board Shock Sensor Only:
Follow steps 1 thru 3 to make sensitivity adjustments to the On-Board Shock Sensor
On-Board Shock Sensor and Optional 2nd Sensor Installations:
If the installation is using (2) sensors, follow steps 1 thru 3 under “2nd Sensor Adjustment” to make sensitivity
adjustments to the 2nd sensor.
ON
1. Light impacts to the body and glass will trigger the
“pre-warning indicator”. The horn/siren will chirp 3
times. Hard impacts to the body or glass will trigger
the “Full Trigger Indicator” . The horn/siren will chirp
1time.
2. Rotate the sensitivity adjuster “Clockwise” to
increase the impact sensitivity.
3. Rotate the sensitivity adjuster “Counterclockwise”
to decrease the impact sensitivity.
Turn the ignition switch from the OFF position to the
ON position to exit the sensor adjustment mode. The
horn/siren will chirp 3 short chirps and 1 longer chirp.
You have exited “On-Board Sensor Adjustment Mode”.
ON
1. Light impacts to the body and glass will trigger the
“pre-warning indicator”. The horn/siren will chirp 3
times. Hard impacts to the body or glass will trigger
the “Full Trigger Indicator” . The horn/siren will chirp
1time.
2. Rotate the sensitivity adjuster “Clockwise” to
increase the impact sensitivity.
3. Rotate the sensitivity adjuster “Counterclockwise”
to decrease the impact sensitivity.
Turn the ignition switch from the OFF position to the
ON position to exit the sensor adjustment mode. The
horn/siren will chirp 3 short chirps and 1 longer chirp.
You have exited “On-Board Sensor Adjustment Mode”.
14
Step 1
Step 1
On-Board Shock & Optional 2nd Sensor Sensitivity Adjustment
On-Board Sensor Adjustment
Optional 2nd Sensor Adjustment
Step 2
Step 3
Step 2
Step 3
PLUS-4900-IM.qxp 4/30/09 3:06 PM Page 14
