4
White 5-Pin Connector
HC2 5 Pin Power Harness
Black/White
(-) Dome Light Supervision Output
Black
Chassis Ground
Yellow
+12VDC Ignition Input
Open
Pr12VDC for Relay Connection
Red
+12VDC Battery Input
White 10-Pin Connector
(Continued)
Violet Wire: (Positive Door Pin Switch Input)
The violet wire connects to the common wire of the vehicle that switches on the dome light. Normally this wire is
located at one of the door jamb switches. For some vehicles it may be necessary to connect the violet wire directly
to the switched turn on wire at the dome light. The violet wire connects to positive switched circuits only.
Red/White Wire: (-) 200mA Programmable Channel 3 Output
(See Alarm Feature Programming Part 3) (Factory default setting on momentary ground) This wire is built-in
user programmable timer output provides a ground through this wire. You may program the built-in timer to
send ground signal for any time interval between 1 second and 2 minutes. For instance, this timer output may
be used to turn on the headlights with the remote control. Also, on certain Mercedes Benz, BMW, Jaguar and
Volkswagens you can use this unique timed output to allow remote closure of all power windows and sunroof
without the need for an external module.
White: (Pulsed Parking Light Relay Output)
Connect the white wire to the parking light wire coming from the headlight switch. Do not connect the white
wire to the dashboard lighting dimmer switch – Damage to the dimmer will result. Use a volt meter to test the
connection point before connecting the red/white wire. While checking, rotate the dimmer switch to make sure
you do not have the dimmer lead. The limitation of the white wire is 10 Amp max. Do not exceed this limit or
damage to the alarm and parking light relay will result.
Parking
Lights
Only
Piggyback
Connection
Headlight Switch
White Wire
White W/ Fuse: (Parking Light Relay Input)
The White w/fuse wire is the input to the flashing parking light relay. The connection of this wire will determine
the output polarity of the flashing parking light relay. Connect the White wire w/ fuse wire to (+) battery to have
(+) output from the relay or connect the white wire to frame ground to have ground output from the relay.
Wiring
(Continued)
PLUS-4900-IM.qxp 4/30/09 3:06 PM Page 4
