docs.carbide3d.com
10/02/2020
Version 1.0
22
Secure Cables at the Y1-Carriage and X/Z-Carriage
Required Components:
Item
Description
Qty
T
4”
Cable Ties
Several
1.
Secure the cables crossing the Y1-carriage plate.
See
Fig. 21
.
a.
Tuck all seven cables, one at a time, into
the cutout at the top of the Y1-carriage
plate.
b.
Use two (2) cable ties, one on each side of
the cutout, to secure the cables in place.
2.
Secure the cables at the rear of the X/Z-carriage.
See
Fig. 22
.
a.
Bundle the X- and Z-cables at the rear of
the X/Z-carriage.
b.
Use a few cable ties to secure the cables
at the back of the Z- and X-motors.
Figure 22
Shapeoko 3 Machines:
Skip ahead to the “Secure Cables Along the X
-
Rail” section on page
Figure 21
