docs.carbide3d.com
10/02/2020
Version 1.0
18
Attach the X-Axis Proximity Switch to the Mount
Required Components:
Item
Description
Qty
A
X-Axis Proximity Switch (2675mm XXL, 2350mm XL, and 610mm Shapeoko 3)
1
F
M3 × 18mm Socket Head Cap Screw
2
1.
Attach the X-Axis proximity switch to the mount
installed on the rear of the X/Z-carriage. See
Fig. 17
.
a.
Locate the X-Axis proximity switch exiting
the drag chain at the X-Axis head bracket.
b.
Position the proximity switch with the red
LED facing the Y2-carriage and the target
pointing down.
c.
Align the proximity switch’s mounting
slots with the two threaded inserts on the
face of the mount.
d.
Use a 2.5mm hex key and two (2)
M3
×
18mm SHCS to secure the proximity
switch.
e.
Before fully tightening the screws, slide the switch up as far as it will go.
Figure 17
