Version 28.01.2013
USB-NTG1
Pa
ge
8
3.2.
Connecting the CAN-box
Locate the Audio Gateway.
Remove the black MOST®-connector which contains the optical leads and analogue
wires from the Audio-Gateway. Remove 4pin insert of the vehicle harness from the
black MOST®-connector and plug in instead the 4pin insert of harness TV-NTG1.
Reconnect the black MOST®-connector. Also see to
.
Unplug the large black connector of TV-NTG1 and plug in 4pin insert like shown
in to . Plug back large black connector.
Connect red (black) wire of TV-NTG1 to +12V (ground) permanent power.
Connect TV-NTG1 to CAN-box TV-400/500.
