Version 28.01.2013
USB-NTG1
Pa
ge
3
1.2.
Check compatibility of vehicle and accessories
1.3.
Setting the dip switches of the CAN-box TV-400/500
TV-400
TV-500
Vehicle/ navigation
Dip 1 Dip 2 Dip 3 Dip 4 Dip 5 Dip 6
Video-in-motion permanent
ON
OFF
OFF
OFF
OFF
OFF
Video-in-motion selective*
OFF
OFF
OFF
OFF
OFF
OFF
* With dip1 to OFF the included green cable is used to activate the video-in-motion function.
Note
: Dip switch functions of the TV-500
Dip 1 – activation TV-free
Dip 2 – no function
Dip 3 – no function
Dip 4 – no function
Dip 5 – CAN-bus termination resistor on the vehicle side
Dip 6 – CAN-bus termination resistor on the head-unit side
Requirements
Vehicle
CLS-Coupe (W219) from 10/2004 til approx. 04/2008, E-class
(W211) til approx. 04/2008, SLK-class (R171) from 03/2004 til
approx. 04/2008
Navigation
Comand APS NTG1
with green Fakra connector on rear-side
From approx week 6 of 2004 it was left out on vehicles which
were delivered w/o factory TV-tuner or factory RVC.
Limitations
Factory-TV-tuner
Must NOT be installed. If uninstalled, optical ring must be closed.
After-market rear-view
Automatic switching to camera only from usbLOGiC mode
camera
as the Comand does not support camera functions.
USB-port
Only for media which work with power supply by ONE single USB
connector
All vehicles
dip 1 ON, dip 2 OFF, dip 3 OFF
