Version 28.01.2013
USB-NTG1
Pa
ge
4
dip switches
of USB-box
dip switches
of USB-box
1.4.
Setting the dip switches of the USB-box USBC-M510
The default dip switch settings of the USB-box
need to be changes ONLY if an after-market
rear-view camera shall be connected or if the AV
of the usbLOGiC shall be deactivated. The dip
switches are located
inside
the USB-box.
For changes it is necessary to open the box.
Default settings are:
dip1 = ON, dip2 = OFF, dip3 = ON
1.4.1.
Automatic switching to rear-view camera
If an after-market rear-view camera shall be connected, in order for
the usbLOGiC to automatically switch to its camera input when reverse
is engaged,
set dip2 = ON (up).
Note:
Automatic switching to after-market rear-view camera works
only from usbLOGiC mode.
1.4.2.
Deactivating usbLOGiC AV input
If no peripheral AV-source shall be connected to the usbLOGiC, we
recommend to disable the AV-input, to avoid customers switching by
mistake to black/no picture of the AV-input. In order to disable the
AV-input of the usbLOGiC,
set dip1 = OFF (down).
