Version 28.01.2013
USB-NTG1
Pa
ge
11
3.4.3.
After-market rear-view camera
Connect the video RCA of the after-market rear-view camera to the
the female RCA connector R-CAM IN of USB-box USBC-M510.
Connect the green wire of C2C-MBN2 to the camera power supply (+12V max. 1A)
The green wire is high (+12V) when reverse gear is engaged.
Note:
Automatic switching to after-market rear-view camera works
only from usbLOGiC mode.
3.4.4.
After-market rear-seat-entertainment
Using RCA-cables, connect the rear-seat-entertainment to the female RCA-connector
VIDEO OUT of USB-box USBC-M510.
Note:
As the output is a full output, not shared with the video signal for the
navigation system, splitting the video with an RCA Y-cable might give a good enough
picture for two rear-seat-entertainment monitors. If not, or if connecting more than
two monitors, use a video splitter.
