Version 28.01.2013
USB-NTG1
Pa
ge
13
4.4.
Assigning device control for connected AV-source
After selecting the usbLOGiC as current AV source, push “2”-button long. When released, a
message “RC2” appears. Now push button “
*
”-button
followed by the device-related IR-
code as described in device control table (appendix A). Push
OK
to confirm the assignment.
Note:
If the AV-input is deactivated (see chapter “Deactivating usbLOGiC AV input”), it is not
necessary, nor possible to assign device controls.
4.5.
Button assignment table
The button assignment table shows which functions of usbLOGiC and additionally connected
devices can be executed by Comand buttons. Once USB or AV-input mode is activated, the
Comand button in the left column will execute the function described in the corresponding
device column. The function description equals the remote control buttons of the optional
usbLOGiC remote control or the additional device. On the additional device the writing may
vary (e.g. AV instead of Source).
Additionally to the Comand buttons, the steering-wheel buttons UP and DOWN can be used
for remote functions. DOWN-button has the same function as “<<” on the Comand and
UP-button has the same function as “>>” on the Comand.
Button assignment table usbLOGiC Mercedes Benz Comand APS NTG1
COMAND
button
Internal
USB
DVB-T
tuners
DVD-player
DVD-
changer
iPod®-control
Analog-tuner
1
POWER
AUTO
PLAY
PLAY
PLAY/PAUSE
SCAN
2
↑
↑
↑
↑
↑
VOL +
3
EXIT
EPG
STOP
STOP
POWER
FM
4
←
←
←
←
←
CH -
4 long
VOL-
INFO
DISPLAY
DISPLAY
DISPLAY
5
OK /
PLAY
OK
OK
OK
ENTER
MODE
6
→
→
→
→
→
CH +
6 long
VOL+
AUDIO
AUDIO
AUDIO
MUTE
FM
7
MEDIA
EXIT
PBC
DISC
SHUFFLE
MUTE
7 long
AUDIO
MANUAL
SUB
SUB
MUTE
8
↓
↓
↓
↓
↓
VOL -
9
SETUP
MENU
SETUP
SETUP
LIGHT
MODE
0
MEDIA
AV
AV
EJECT
DISPLAY
0 long
POWER
POWER
POWER
POWER
POWER
POWER
<<
TRACK -
CH -
TRACK -
TRACK -
TRACK -
CH -
>>
TRACK +
CH +
TRACK +
TRACK +
TRACK +
CH +
