Version 28.01.2013
USB-NTG1
Pa
ge
12
4.
Operation
4.1.
Activation of the video-in-motion function
TV-400
The video-in-motion function is activated permanently without disturbing the navigation
performance.
Note
: The loose white and green cable are not required and must be isolated.
TV-500
The video-in-motion can be activated and deactivated by Dip 1 or alternatively by the
included loose green cable in connection with a switch (not included in delivery).
Video-in-motion permanent
With dip1 to ON the video-in-motion function is activated permanently without disturbing
the navigation performance.
Video-in-motion selective
With dip1 to OFF the included green cable is used to activate the video-in-motion function.
Connect a switch to the green cable and connect the green cable to +12V ACC.
●
+12V
= TV-Free is activated
●
0V
= TV-Free is not activated
Note
: The loose white cable is not required and must be isolated.
4.2.
Selecting the usbLOGiC as current AV-source
Push the
VIDEO
button of the Comand and then select
TV
to choose the usbLOGiC as current
AV-source.
4.3.
Switching between USB and AV-input
After selecting the usbLOGiC as current AV source, push “5”-button long to switch from
internal USB to AV-input. Repeat to switch back to internal USB.
Note:
If the AV-input is deactivated (see chapter “Deactivating usbLOGiC AV input”), it is not
possible to switch to the usbLOGiC’s AV-input.
