MANUAL MODE DISPLAY
2.
FrONT CLAMp
:
This key is used for raising and lowering the front clamp that releases or
holds down the wood.
(1) Press the
key, the front clamp will raise up to release wood.
(2) Press the
key again, the front clamp will lower to press the wood. At
this time, the
key will light on.
3.
CuTTEr
(1) Press the
key, then both cutter spindles move forward. At this time
the
Fwd
key light on.
(2) Press the
key again, then both cutter spindles move backward to
their home positins. At this time, the
key distinguishes.
EM-10 / EM-12
This manual describes the machine in current produce on.
We reserve the right to change the specifications without notice.
48
