E.FEED SYSTEM:
The Feed is driven by a 0.75kW 3 phase motor, and the connecting belt is an A-24 V-belt. For a
more comprehensive illustration of the feed system, refer to drawings
300-03V
and
300-0
4
V
.
The feed system is a lubrication free drive system which requires minimum maintenance. The worm
wheels are a wearing component and should be checked regularly for wear, and if wear is present, they
might need to be changed.
Once the leading edge of the board passes under the sensor (MEASURE PROX.), the sensor indicator
light should come on, the counter begins measuring the board length until the trailing edge comes o
ff
the sensor. Once the sensor goes o
ff
there is a time delay until the rear clamps activate and clamp the
board, refer to the section “Operating Instructions” section and the “Touchscreen Manual” for timer
adjustments.
The sensor is a photoelectric proximity switch which reflects a beam o
ff
the reflector, once the beam is
broken the signal is obtained.
NOTE: The cleaning of the reflector is very important to obtaining a reliable signal, the cleaning of the
reflector should be incorporated into the maintenance schedule.
EM-10 / EM-12
This manual describes the machine in current produce on.
We reserve the right to change the specifications without notice.
12
