SPIRAL CUTTER GRAPH EXPLANATION:
A1~A5
The knives has dirty and incorrect combination would make it rift.
A-4
If air screw driver lock lower 6KG cause knife trough seals of wood chip from chink pressure
to knives broken.
A-5
The wrench pressure up to 6KG, it will cause blade or screw broken, this is due to the T.C.
blade is the hardest, so when cutting very high speed, the screw instead of blade cutter head
have unusual voice or shake when cutting and cause cutting balance is nor well, please stopped
to insect the machine.
B1~B6
CORRECT COMBINATION METHOD”
1. Loosing the pressure and adjust pressure to 6KG air screw driver.
2. Adjusting speed regulator with 3.
3. Combination blades with B1~B6.
EM-10 / EM-12
This manual describes the machine in current produce on.
We reserve the right to change the specifications without notice.
20
