In a normal state, one light will keep shining and another will only shine when working piece passes. If
both two are keeping shining, please adjust via the hole.
In a normal state, the light of sensor will always shine but go out when pressing the working piece.
Please adjust the screw if it does not work rightly.
When the cylinder is moving, there is a route for the light of sensor’s shining. The left sensor is
supposed to be set up in the middle of this shining route, and the right sensor is supposed to be set up
in the right side of this shining route. The left light will shine when the cylinder touches the right side.
The right light will shine when the cylinder touches the left side.
EM-10 / EM-12
This manual describes the machine in current produce on.
We reserve the right to change the specifications without notice.
14
