Canon XA30 Page 94 Instruction Manual Download

Page: 94 / 192

Video Snapshot

Record a series of short scenes. To record a video snapshot scene, set an assignable button to
[

Video Snapshot] in advance.

1 Set an assignable button to [

Video Snapshot] (

100).

2 Press the assignable button to activate video snapshot mode.

•

(the default length of a video snapshot scene) appears on the screen.

• Press the button again to deactivate video snapshot mode.

3 Press

• The camcorder records for a few seconds and then automatically returns to record standby

mode.

• When the camcorder stops recording, the screen will momentarily turn black as if a camera

shutter had released.

NOTES

• The default length of a video snapshot scene is 4 seconds but you can change it to 2 or 8 seconds

with the

[Video Snapshot Length] setting.

• Any of the following will deactivate video snapshot mode:

- Turning off the camcorder.
- Changing the camcorder's operating mode.
- Changing the movie format or frame rate.

Operating modes:

Summary of Contents for XA30

































































































































































































Search results

Summary of Contents for XA30

Reviews:

Related manuals for XA30

Brands by name

Popular brands

Canon XA30, Instruction Manual

Search results

Summary of Contents for XA30

Reviews:

Related manuals for XA30

Brands by name

Popular brands