manualshive.com logo in svg

Canon XA30, Instruction Manual

The Canon XA30 is a powerful camcorder designed for professionals and enthusiasts alike. Capture stunning high-definition videos with ease using its advanced features. Enhance your filming experience by accessing the comprehensive Instruction Manual, available for free download from our website, ensuring you make the most of this exceptional product.

Share
Download
background image

Troubleshooting

169

List of Messages for Wi-Fi Functions

Refer also to the instruction manual of your access point and other devices you will use.

To record video on this memory card, it is recommended to use a video quality setting other 
than [59.94P Recording].

- When using a memory card rated SD Speed Class 2 or 4, you may not be able to record 

movies if you use a recording mode of 28 Mbps LPCM (59.94P), 28 Mbps (59.94P) or 35 Mbps 
(59.94P).

To use this function change the camera mode to Manual or Cinema

-

C

, the CUSTOM dial (

A

99) and some of the functions that can be assigned to the 

assignable buttons (

A

100) cannot be used in 

 mode. Set the mode switch to 

n

 

(

 

mode) or 

E

(

 mode) to use them.

Too many photos.   Disconnect the USB cable.

- Disconnect the USB cable. Try using a memory card reader or decrease the number of photos 

on the memory card to fewer than 2,500 (Windows), or 1,000 (Mac OS). 

- If a dialog box appeared on the computer screen, close it. Disconnect the USB cable, and 

restore the connection after a short while.

Unable to recognize the data

- The camcorder cannot recognize data that was recorded using a video configuration that is not 

supported (PAL or SECAM).

Unable to recover data

- Could not recover a corrupted file. Save your recordings (

A

118) and initialize the memory 

card using the [Complete Initialization] option (

A

38).

Another user is already controlling the camcorder. Try again later.

- This message appears on the screen of the Wi-Fi device. Multiple Wi-Fi devices are trying to 

connect with the camcorder. Make sure only one Wi-Fi device is trying to connect and then 
touch Retry.

IP address conflict

- Change the camcorder’s IP address to avoid any conflict with devices connected to the same 

network. Alternatively, change the IP address of the conflicting device.

Memory card cover is open

- The double memory card slot cover was opened while the memory card was being accessed. 

Stop the Wi-Fi function in use and end the Wi-Fi connection.

Multiple access points detected. Try the operation again.

- There are multiple access points sending out a WPS signal at the same time. Try the operation 

again later or perform setup using the [WPS: PIN Code] or [Search for Access Points] option 
(

A

141).

No access points found

- The access point set in the camcorder could not be found.
- Cordless phones, microwave ovens, refrigerators and other appliances may interfere with the 

wireless signal. Try using the camcorder in a location farther away from such appliances.

- Make sure that you use the access point’s SSID for the camcorder’s Wi-Fi settings (

A

142).

- If the access point is using MAC address filtering, enter the camcorder’s MAC address in the 

access point’s configuration screen.

Unable to access configuration files

- Turn off the camcorder. After a short while, turn it on again. If the problem persists contact a 

Canon Service Center.

Summary of Contents for XA30

































































































































































































Reviews:

No comments

Related manuals for XA30

Ubiquiti UVC-G3 Quick Start Manual preview
UVC-G3
Brand: Ubiquiti Pages: 28
Genius G-SHOT DV511 Manual preview
G-SHOT DV511
Brand: Genius Pages: 74
Fisher VPC-CA6 Instruction Manual preview
VPC-CA6
Brand: Fisher Pages: 193
TDK VCS-04 User Manual preview
VCS-04
Brand: TDK Pages: 30
DXG DXG-590V HD User Manual preview
DXG-590V HD
Brand: DXG Pages: 80
Lumens VC-A61P User Manual preview
VC-A61P
Brand: Lumens Pages: 48
Lumens VC-A71P User Manual preview
VC-A71P
Brand: Lumens Pages: 54
Sony SPK-PC3 Operating Instructions preview
SPK-PC3
Brand: Sony Pages: 4
media-tech PENCAM MT4032 User Manual preview
PENCAM MT4032
Brand: media-tech Pages: 6
media-tech D-MENTION MT4038 User Manual preview
D-MENTION MT4038
Brand: media-tech Pages: 27
AgfaPhoto eclipse EXPLORER Specifications preview
eclipse EXPLORER
Brand: AgfaPhoto Pages: 2
ElectroFlip NiteEye Mini User Manual preview
NiteEye Mini
Brand: ElectroFlip Pages: 8
EverFocus EQH5000 Operation Manual preview
EQH5000
Brand: EverFocus Pages: 28
RecorderGear CG1000 User Manual preview
CG1000
Brand: RecorderGear Pages: 12
Abus TVVR11001 User Manual preview
TVVR11001
Brand: Abus Pages: 123
Velleman CAMCOLVC18 User Manual preview
CAMCOLVC18
Brand: Velleman Pages: 53
Samsung VP-D200 Owner'S Instruction Manual preview
VP-D200
Brand: Samsung Pages: 108
Panasonic AJHPX2700G - MEMORY CARD CAMERA-RECORDER Operating Instructions Manual preview
AJHPX2700G - MEMORY CARD CAMERA-RECORDER
Brand: Panasonic Pages: 206

Brands by name

Popular brands

Load more brands