Canon XA30 Instruction Manual Download

Page: 112 / 192

Connecting to an External Monitor

112

Selecting the Terminal Used For Output

To output your recordings on an external monitor, you must first select which terminal you will use.

1 Open the [Output Terminal] screen.

[FUNC.]

[MENU]

[Output Terminal]

• Touching [FUNC.] is necessary only when performing the procedure in

mode.

2 Touch the desired option and then touch [

• If you selected [

HD/SD-SDI], [

HD/SD-SDI & HDMI] or [

HDMI], continue with the

relevant procedure below to configure the output signal.

Options

(

Default value)

Using the HD/SD-SDI Terminal

The digital signal output from the HD/SD-SDI terminal includes the video signal, audio signal and time
code signal. If necessary, perform the following procedure to change the video output signal.

1 Open the [HD/SD-SDI Output] screen.

[FUNC.]

[MENU]

[HD/SD-SDI Output]

• Touching [FUNC.] is necessary only when performing the procedure in

mode.

2 Touch the desired option and then touch [

NOTES

• By default, onscreen displays will be embedded in the output video signal. You can change this

using the

[Output Onscreen Displays] setting.

Using the HDMI OUT Terminal

The HDMI

OUT terminal also offers a digital connection and outputs both a video and audio signal.

If you selected [

Automatic], the output signal will automatically switch to HD or SD depending on

the capability of the external monitor. In

mode, the HDMI OUT terminal outputs two-channel

linear PCM audio with a sampling frequency of 48 kHz.

1 Open the [HDMI Output] screen.

[FUNC.]

[MENU]

[HDMI Output]

• Touching [FUNC.] is necessary only when performing the procedure in

mode.

2 Touch the desired option and then touch [

NOTES

•

When

[Output Terminal] is set to [

HD/SD-SDI & HDMI], the signal output

from the HDMI OUT terminal will be determined by the

[HD/SD-SDI Output] setting.

[

Off]

There is no output from any terminal.

[

HD/SD-SDI]

There is output only from the HD/SD-SDI terminal.

[

HD/SD-SDI & HDMI]

There is output from the HD/SD-SDI and HDMI OUT terminals.

[

HDMI]

There is output only from the HDMI OUT terminal.

[

AV OUT]

There is output only from the AV OUT terminal.

Summary of Contents for XA30

































































































































































































Search results

Summary of Contents for XA30

Reviews:

Related manuals for XA30

Brands by name

Popular brands

Canon XA30, Instruction Manual

Search results

Summary of Contents for XA30

Reviews:

Related manuals for XA30

Brands by name

Popular brands