Canon XA30, Instruction Manual

Page: 168 / 192

Troubleshooting
168
Need to recover files from the memory card. Change the position of the LOCK switch on the
memory card.
- This message will appear the next time you turn on the camcorder if power supply was
accidentally interrupted while the camcorder was writing on the memory card and later the
position of the card's LOCK switch was changed to prevent erasure. Change the position of the
LOCK switch.
No memory card
- Insert a compatible memory card into the camcorder (
A
38).
No photos
- There are no photos to play back.
No scenes
- There are no scenes on the memory card selected.
Not enough available space
- Delete some recordings to free some space (
A
107, 117).
- Set the recording mode to 5 Mbps for AVCHD movies or 3 Mbps for MP4 movies.
- The available space on the memory card is less than the size of the recordings you are trying to
copy. Delete some recordings to free some space (
A
107, 117) or reduce the number of
recordings to copy.
Number of scenes already at maximum
- The number of scenes on the memory card has reached 3,999 (the maximum number of
scenes for AVCHD movies). Delete some scenes (
A
107) to free some space.
Recording was stopped due to insufficient write speed of the memory card
- The write speed of the memory card was too slow so recording was stopped. Replace the
memory card with one rated SD Speed Class 4, 6 or 10.
- When the recording mode is 28 Mbps LPCM (59.94P), 28 Mbps (59.94P) or 35 Mbps (59.94P),
you must use a memory card rated SD Speed Class 6 or 10.
- When recoding movies using slow & fast motion, you must use a memory card rated SD Speed
Class 10.
- After repeatedly recording, deleting and editing scenes (fragmented memory), it will take longer
to write data on the memory card and recording may stop. Save your recordings (
A
118) and
initialize the memory card (
A
38).
Scene recorded using another device. Cannot copy the scene.
Scene recorded using another device. Cannot divide the scene.
- Scenes that were not recorded with this camcorder cannot be copied or divided with this
camcorder.
Some scenes could not be deleted
- Movies that were protected/edited with other devices and then transferred to a memory card
connected to the computer cannot be deleted with this camcorder.
Some scenes were recorded using another device and cannot be copied.
- Scenes that were not recorded with this camcorder cannot be copied.
Task in progress. Do not disconnect the power source.
- The camcorder is updating the memory card. Wait until the operation ends and do not
disconnect the compact power adapter or remove the battery pack.
This photo cannot be displayed
- You may not be able to display photos taken with other devices or image files created or edited
on a computer and then transferred to a memory card connected to the computer.