manualshive.com logo in svg

Canon WFT-E6, Instruction Manual

Share
Download
Canon WFT-E6 Instruction Manual Download Page 99

99

Responding to Error Messages

 

Is the pairing software running?

X

Start the pairing software and follow the instructions to re-establish the connection (p.44).

 

Are the transmitter and wireless LAN terminal configured with the same encryption 
key for authentication?

X

This error occurs if the encryption keys do not match when the authentication method for 
encryption is [

Open system

].

The setting is case-sensitive, so check upper- and lower-case characters. Make sure the 
correct encryption key for authentication is entered on the transmitter (p.20).

 

Are the target computer and wireless LAN terminal on?

X

Turn on the target computer and wireless LAN terminal.

What to check on the transmitter

 

On the transmitter, the network setting is [Auto setting] or the IP address setting is 
[Auto assign]. Does the error occur under these settings?

X

If no DHCP server is used, set the transmitter’s network setting to [

Manual setting

] and 

IP address setting to [

Manual setting

] (p.23).

What to check on the DHCP server

 

Is the DHCP server on?

X

Turn the DHCP server on.

 

Are there enough addresses for assignment by the DHCP server?

X

Increase the number of addresses assigned by the DHCP server.

X

Remove devices assigned addresses by the DHCP server from the network to reduce the 
number of addresses in use.

 

Is the DHCP server working correctly?

X

Check the DHCP server settings to make sure it is working correctly as a DHCP server.

X

If applicable, ask your network administrator to ensure the DHCP server is available.

11: Connection target not found

12: Connection target not found

21: No address assigned by DHCP server

Responding to Error Messages 21 - 26

Also check the following points when responding to errors numbered 21 - 26. 

Are the transmitter and wireless LAN terminal configured with the same encryption key for 
authentication? 

X

This error occurs if the encryption keys do not match when the authentication method for 
encryption is [

Open system

]. The setting is case-sensitive, so check upper- and lower-case 

characters. Make sure the correct encryption key for authentication is entered on the transmitter 
(p.20).

COP

Y

Summary of Contents for WFT-E6































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands