manualshive.com logo in svg

Canon WFT-E6, Instruction Manual

Share
Download
Canon WFT-E6 Instruction Manual Download Page 68

68

 

Arrange the slave cameras in clear view of the master camera, without objects between 
them. 

 

You can arrange master camera in an overall circumference of up to approximately 100 m / 
328 ft. However, the distance supported for linked shooting may be shorter depending on 
the wireless communication conditions, which are affected by how the cameras are 
arranged, the environment of use, and weather conditions. 

 

Pressing the shutter button halfway on the master camera puts slave cameras in the same 
state, as if the shutter buttons were pressed halfway. Similarly, fully pressing the shutter 
button on the master camera has the same effect on slave cameras, which respond as if the 
shutter buttons were fully pressed. 

 

There will be a slight delay after you release the master camera shutter until the slave 
camera shutters are released. (Simultaneous capture is not possible.)

Arranging the Slave Cameras

Slave camera

Slave camera

Slave camera

Slave camera

Master camera

COP

Y

Summary of Contents for WFT-E6































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands