Canon WFT-E6, Instruction Manual

Page: 10 / 126

10
Turn off the camera before attaching the transmitter.
The transmitter is powered by the camera. Ensure the camera battery has sufficient
charge. If the charge drops below 19%, you cannot transfer captured images.
1
Open the terminal cover on the camera.
Pull out the system extension terminal cover and
rotate it toward the front.
2
Attach the transmitter.
Align the transmitter terminal and attachment pin
with the corresponding camera terminal and hole.
Push the terminal firmly into the camera.
As you push the terminal into the camera with your
left index finger, turn the tightening screw until it
stops rotating to attach the transmitter securely.
Removal
Turn off the camera.
Loosen the tightening screw until it spins freely.
Pull the terminal out of the camera.
Attaching to the Camera
COP
Y