Canon WFT-E6, Instruction Manual

Page: 19 / 126

19
When you select [ Connect with wizard ], active wireless LAN terminals in your area are listed,
accompanied by information about them. Select the SSID (or ESS-ID) of your desired wireless
LAN terminal.
1
Select [Connect with wizard].
Turn the <
5
> dial to select [ Connect with
wizard ], and then press <
0
>.
2
Select the wireless LAN terminal.
To select the wireless LAN terminal, press <
0
>.
Turn the <
5
> dial to select the wireless LAN
terminal, and then press < 0 >.
Select [ OK ] and press <
0
> to go to the next
screen.
1
Indicates whether the device is in infrastructure or ad hoc mode
2 An icon is displayed if the wireless LAN terminal is encrypting communication
3
Indicates the first 9 characters of the SSID
4 Indicates the channel used
Encryption by Wireless LAN Terminals
If the wireless LAN terminal is encrypting communication, select the corresponding method in
[
Authentication ] and [ Encryption ].
[ Authentication ]: Open system, Shared key, WPA-PSK, or WPA2-PSK
[ Encryption ]: WEP, TKIP, or AES
[Enter connection] and [Search again]
To configure settings for the wireless LAN terminal manually, select [ Enter connection ] and
press <
0
>. Complete the settings for the items displayed, one after another.
To search for wireless LAN terminals again, select [ Search again ] and press <
0
>.
Using the Wizard to Establish a Connection
Selecting the Wireless Network
1 2 3 4
COP
Y