Canon WFT-E6, Instruction Manual

Page: 20 / 126

20
Using the Wizard to Establish a Connection
Next, enter the encryption key of the wireless LAN terminal. For details on the encryption key,
refer to the device’s instruction manual.
Note that the screens displayed in steps 1 to 3 below vary depending on the authentication and
encryption of the wireless LAN terminal.
1
The [ Key index ] screen is displayed only if WEP
encryption is used by the wireless LAN terminal.
Turn the <
5
> dial to select the key index number
specified as the access point, and then press
<
0
>.
Select [ OK ] and press < 0 > to go to the next
screen.
2
Turn the <
5
> dial to select the key format, and
then press <
0
>.
Select [ OK ] and press <
0
> to go to the next
screen.
3
Enter the encryption key.
To switch between input areas, press the <
Q
>
button.
To move the cursor, turn the < 5 > dial.
In the bottom input area, turn the <
5
> dial and
press < 0 > to enter the encryption key.
If you make a mistake, press the <
L
> button to
erase it.
When you press the < 7 > button to complete
the connection with the wireless LAN terminal, the
[
Network ] screen (p.23) is displayed.
To return to the previous screen, press the
<
6 > button. The entry is erased.
Entering the Wireless LAN Encryption Key
COP
Y