109
Troubleshooting
FTP server
1
Is the FTP server set to allow particular IP addresses only?
X
Change the FTP server settings to allow connections with the TCP/IP [
IP address
]
set in the WFT-E1.
For Windows 2000 and Windows XP, go to [
Start
] button
Æ
[
Control Panel
]
Æ
double-click [
Network Connections
]
Æ
right-click [
Local Area Connection
]
Æ
[
Properties
]
Æ
double-click [
Internet Protocol (TCP/IP)
]
Æ
[
Advanced
] button
Æ
[
Options
] tab
Æ
double-click [
TCP/IP filtering
]
Æ
[
{
Permit Only
]
Æ
[
Add
] button
Æ
enter TCP port [
21
]
Æ
[
OK
] button.
FTP server
1
Are you trying to connect to the FTP server using more than the set maximum
number of simultaneous connections?
X
Reduce the number of network devices connecting to the FTP server, or increase
the maximum number of devices that can connect to the FTP server using the
following procedure.
X
For Windows 2000 and Windows XP, increase [
Limited To
] on the [
FTP Site
] tab
(p.18).
This error appears if it fails to disconnect from the FTP server for some reason.
Turn off the FTP server’s power, the camera’s power, and the WFT-E1’s power,
and then turn them on again.
42: FTP server rejected connection
43: Cannot connect to FTP server.
Error code received from server.
44: Cannot disconnect FTP server.
Error code received from server.
COP
Y
Summary of Contents for WFT-E1
Page 14: ...14 MEMO COPY ...
Page 30: ...30 MEMO COPY ...
