Canon VIXIA HF G50, Instruction Manual

Page: 102 / 132

Menu Options
102
[
£
Display Setup] menu
[Output Status]:
Displays a screen where you can verify the standard of the output signal from the
HDMI OUT terminal.
[LCD Brightness]:
Adjusts the brightness of the LCD screen.
• Changing the brightness of the LCD screen does not affect the brightness of your recordings or the
brightness of the playback image on a TV.
[LCD Backlight]/[Viewfinder Backlight]: Sets the screen to one of three brightness levels (for the LCD
screen) or two brightness levels (for the viewfinder).
• Changing the brightness of the screen does not affect the brightness of your recordings or the
brightness of the playback image on a TV.
• Using the [ Bright] setting will shorten the effective usage time of the battery pack.
[LCD Mirror Image] : When this setting is set to [
i
On], this function reverses the image on the screen
horizontally when you rotate the LCD panel 180 degrees toward the subject. In other words, the
screen will show a mirror image of the subject.
• If the camcorder, optional remote controller or a commercially available remote control is operated
while the mirror image is displayed, the mirror image will deactivate temporarily for approximately 4
seconds.
[Output Onscreen Displays]:
When set to [
i
On], the camcorder’s onscreen displays will appear also
on the screen of a TV or monitor connected to the camcorder.
[Onscreen Markers]:
You can display a grid or a horizontal line at the center of the screen. Use the
markers as a reference to make sure your subject is framed correctly (vertically and/or horizontally).
• Onscreen markers are not available when magnification is activated.
• Using the onscreen markers will not affect the recordings.
[Distance Units]:
Selects the units to use for the focusing distance display while focusing manually. This
setting also affects units for GPS information when using the optional GP-E2 GPS Receiver.
Menu item Setting options
A
[HDMI Max
Resolution] [3840x21 6 0]*, [1 9 20x1080], [1280x720(5 9 . 9 4P)]
* mode only.
 
9 2
[HDMI Scan Mode] [ P], [ PsF (Forced 1080i)]
 
9 2
[Output Status] –
 
–
[LCD Brightness]
 
–
[LCD Backlight] [ Bright], [ Normal], [ Dim]
 
–
[Viewfinder
Backlight] [ Bright], [ Normal]
 
–
[LCD Mirror Image] [
i
On], [
j
Off]

– –
[Output Onscreen
Displays] [
i
On], [
j
Off]
 
–
[Onscreen Markers] [
j
Off], [
4
Level (Gray)], [
3
Level (White)],
[
6
Grid (Gray)], [
5
Grid (White)]

– –
[Distance Units] [
.
meters], [
/
feet]
 
–