Zooming
53
NOTES
• When an optional RC-V100 Remote Controller is connected to the camcorder, you can zoom with
the remote controller's ZOOM dial. At default settings, turn the dial right to zoom in (
S
) and left to
zoom out (
T
).
Soft Zoom Control
Soft zoom control allows you to start and/or stop the zoom gradually.
1 Select [Soft Zoom Control].
>
[
v
!
Camera Setup]
>
[Soft Zoom Control]
2 Select the desired option and then select [
X
].
Options
Digital Tele-Converter
Using the digital tele-converter, you can digitally increase the focal length of the camcorder by a factor
of approx. 2 and record the enlarged image.
1 Select [Digital Zoom].
>
[
v
!
Camera Setup]
>
[Digital Zoom]
2 Select [
Digital Tele-conv.] and then select [
X
].
3 Open the zoom controls.
[FUNC]
>
[
R
Zoom]
4 Select [
] (digital tele-converter) and then select [
X
].
• The center of the screen will be enlarged approximately 2 times and the
icon will appear.
• Select [
] again before closing the screen to deactivate the digital tele-converter.
NOTES
• You can attach the optional tele-converter and use it in conjunction with this function to increase the
effect.
• The digital tele-converter cannot be set while recording or when
>
[
v
Camera Setup]
>
[Conversion Lens] is set to [
¿
WA-H58].
• The image is digitally processed so the image will deteriorate throughout the zoom range.
• The digital tele-converter will be deactivated if the resolution is switched between 3840x2160 and
another one.
[
j
Off]:
Use this setting if you do not intend to use soft zoom control.
[
¬
Start]:
Zoom starts gradually.
[
®
Stop]:
Zoom stops gradually.
[
¯
Start & Stop]: Zoom start and stops gradually.
Operating modes:
