Canon VB-H43 Operation Manual Download Page 69

Page: 69 / 195

ting Page

Video Server

(1) [Maximum Number of Clients]

Set the maximum number of clients that can be

connected to the camera at the same time. Up to 30

clients can be set.

If 0 is set, connection is prohibited except for the

Administrator.

(2) [Camera Control Queue Length]

Set the maximum queue length for clients requesting

camera control privilege from the viewer. The

maximum number is 30. Enter an integer from 0 to 30.

If 0 is set, camera control is prohibited except for the

Administrator.

(3) [Maximum Connection Time (sec.)]

Set the time in seconds during which an individual

client can connect to the camera. The maximum

number is 65535. Enter an integer from 0 to 65535. If 0

is set, the connection time becomes unlimited.

(4) [Camera Control Time (sec.)]

Enter the maximum time VB Viewer can retain camera

control privileges. The maximum number is 3600.

Enter an integer from 1 to 3600.

Audio Server

(1) [Audio Transmission from the Camera]

When [Enable] is selected, the audio input through the

microphone attached to the camera can be

transmitted to the Viewer.

(2) [Input Volume]

Set the volume of input for the microphone connected

to the camera in the range of 1 to 100. The greater the

value, the larger the input volume becomes.

(3) [Voice Activity Detection]

If [Enable] is selected, the audio transmission is

stopped temporarily when no audio is output. This

way, the load of the applicable network can be

reduced.

(4) [Audio Reception from Viewer]

If [Enable] is selected, the audio received from the

Admin Viewer and RM Viewer can be output from the

speaker with amplifier connected to the camera.

(5) [Output Volume]

Set the volume of output for the speaker connected to

the camera in the range of 1 to 100. The greater the

value, the larger the output volume becomes.

[Server]
Setting the Video Server, Audio Server, HTTP Server, FTP Server and
WS-Security

The following can be set here.

• Video

erver

Set the video transmission from the camera.

• Audio

erver

Set the audio transmission/reception.

• HTTP

erver

Set the authentication method, and HTTP port

number.

• FTP

erver

Configure settings for FTP server use.

• W

ecurity

Configure settings for checking the time with WS-

Security.

• Audio Transmission
• Input Volume
• Voice Activity Detection

• Audio Reception
• Output Volume

Summary of Contents for VB-H43




































































































































































































Search results

Summary of Contents for VB-H43

Reviews:

Brands by name

Popular brands

Canon VB-H43, Operation Manual

Search results

Summary of Contents for VB-H43

Reviews:

Brands by name

Popular brands