Canon VB-H43 Operation Manual Download Page 150

Page: 150 / 195

150

• To use the audio function in environments that use a proxy server,

the camera IP address must be specified in [Internet options] >

[Connections] > [LAN settings] > [Proxy server] > [Advanced] >

[Exceptions] of Internet Explorer.

Checking Information

The following icons will appear depending on the content

of the information displayed.

Note

For details on the messages, see “List of Viewer Messages”

(p. 178).

Icon (color)

Meaning

Description

(Blue)

Information

Appears when a camera
operation has been successful.
The following information
appears.
• Help messages, such for each

button and pull down menu

• Frame rate information

•

Pan, tilt, zoom

camera information, image
stabilization information

•

Pan, tilt, and zoom information
for Digital PTZ

(Yellow)

Warning

A message will appear notifying
the user when camera control
privileges cannot be obtained,
audio reception stops, etc.

(Orange)

Error

Appears when a system error
occurs.

Important

If the image stabilizer function is turned on in the setting page

(p. 58), the actual viewing angle of the image will be smaller

than the viewing angle displayed in the information field.
Also, the viewing angle of image display becomes smaller than

the angle (frame) displayed in the panorama display area.

Summary of Contents for VB-H43




































































































































































































Search results

Summary of Contents for VB-H43

Reviews:

Brands by name

Popular brands

Canon VB-H43, Operation Manual

Search results

Summary of Contents for VB-H43

Reviews:

Brands by name

Popular brands