Canon VB-H43, Operation Manual

Page: 112 / 195

112
The preset is registered in the tour schedule list. Up to
20 presets can be registered.
In [Speed (PT)] and [Speed (Z)], you can set the pan,
tilt, and zoom speeds of the preset.
In [Pause (sec)], you can enter the number of
seconds for the camera to remain stationary at the
preset position.
When [Preview] is clicked, the camera angle switches
to this preset, and the new angle can be checked in
the video display area.
When you want to delete changes made to the tour
schedule list and restore the settings registered in the
camera, click [Restore settings].
When you complete setting the tour schedule list, click
[Save settings]. The settings are saved in the camera.
Note
The home position cannot be added to the tour schedule list.
2
S elect the preset number you want to add to the tour
schedule from the [Preset] selection box, and then
click [Add].
3
S elect a preset in the tour schedule list, and set the
preset operation.
4
Click [Change].
5
Click [ S ave settings].
Important
If preset tour is used, do not use the intelligent function.