Canon VB-C10 User Manual Download Page 56

Page: 56 / 138

4-4

Installing VB Administration Tools

Install VB Administration Tools from the CD-ROM supplied with the VB-C10/VB-C10R.

3. Perform the installation following instructions on the screen.

4. Complete installation.

When installation is complete, two icons are created on the desktop: “VB Admin Tools” and
“Admin Viewer”.

1. Turn on the power to the PC.

If power to the PC is already on and Windows is running, exit all other applications before
installing VB Administration Tools.

2. Insert the CD-ROM supplied with the VB-C10/VB-C10R into the PC’s CD-ROM

drive, and follow the procedure below.

Double-click “My Computer” on the desktop.

When using Windows XP, click on the “Start” button, then click “My Computer”.

When the CD-ROM icon appears, double-click this icon, then double-click “AdmSetup exe.”

Also, When [Program]-[WebView Livescope] is selected from
the Start menu, two shortcuts are created in the same way.

Note

VB Administration Tools require that Microsoft Internet Explorer 5 or later be installed.

Summary of Contents for VB-C10











































































































































Search results

Summary of Contents for VB-C10

Reviews:

Related manuals for VB-C10

Brands by name

Popular brands

Canon VB-C10, User Manual

Search results

Summary of Contents for VB-C10

Reviews:

Related manuals for VB-C10

Brands by name

Popular brands