Canon TS7400 Series Online Manual Download Page 384

Page: 384 / 454

•

From computer (Windows):

1. Check that printer is turned on.

2. Open Canon IJ Printer Assistant Tool.

Opening the Maintenance Tool (Canon IJ Printer Assistant Tool)

3. Select

Custom Settings

4. Select

Prevents paper abrasion

check box and select

5. Check message and select

•

From computer (macOS):

Adjust the setting to prevent paper abrasion from Remote UI.

Opening Remote UI for Maintenance

Check5

If brightness is set low, increase brightness setting and try printing again.

If you are printing with a low brightness setting on plain paper, the paper may absorb too much ink and become
wavy, causing paper abrasion.

• Printing from your computer (Windows)

Check the brightness setting in the printer driver.

Adjusting Brightness

• Copying

Setting Items for Copying

Check6

Is platen glass or glass of ADF dirty?

Clean the platen glass or the glass of ADF.

Cleaning Platen and Document Cover

Cleaning the ADF (Auto Document Feeder)

Note

• If the glass of ADF is dirty, black streaks appear on the paper as shown below.

Check7

Is paper feed roller dirty?

384

Summary of Contents for TS7400 Series







































































































































































































































































































































































































































































Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands

Canon TS7400 Series, Online Manual

Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands