Canon TS7400 Series Online Manual Download Page 64

Page: 64 / 454

Select

Wi-Fi

and click

Enter password and click

The

Network Settings

screen appears.

Perform/change settings.

You can switch the screen between IPv4 and IPv6. Click the tab to switch the protocol.

• IPv4/IPv6 settings

A: Network Type:

Select the Wi-Fi mode.

◦

Infrastructure

Connects the printer to the Wi-Fi with a wireless router.

◦

Direct

Connects the printer to wireless communication devices (smartphone or tablet) without a
wireless router.

Note

If Wi-Fi is enabled on the computer and if you select a USB connected printer on

step 4, you can select

Direct

depending on the printer you are using.

Direct

is selected, all items are displayed in a gray out status and you cannot

perform any settings.

In addition, you cannot connect to Internet from your computer depending on your
operating environment.

B: Network Name (SSID):

The network name (SSID) of the Wi-Fi currently used is displayed.

Summary of Contents for TS7400 Series







































































































































































































































































































































































































































































Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands

Canon TS7400 Series, Online Manual

Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands