Canon TS7400 Series Online Manual Download Page 68

Page: 68 / 454

Assigning Printer Information

Follow the procedure below to assign/change printer location name or device name.

The names appear on

Device Name:

and

Location:

on the

Canon IJ Network Device Setup Utility

screen.

Note

• If

USB

is selected from the pulldown menu on the toolbar, this setting item is not available.

Start up IJ Network Device Setup Utility.

Check the displayed message and select

Yes

Select

Printer Network Setup

on the displayed screen.

Detected printers are listed.

Select printer to assign location name and device name.

Select the printer with

Available

displayed on

Status

Select

Detailed Printer Settings...

Printer Settings

menu.

The

Confirm Printer Password

screen appears.

For more on the password, refer to Administrator Password.

Enter password and click

The

Detailed Printer Settings

screen appears.

Perform/change settings.

The setting items below are available.

A: Device Name:

Assigns the device name.

B: Location:

Assigns the location name.

Click

Set

Summary of Contents for TS7400 Series







































































































































































































































































































































































































































































Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands

Canon TS7400 Series, Online Manual

Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands