Canon TS7400 Series Online Manual Download Page 288

Page: 288 / 454

Setting Items for Copying

You can change the copy settings such as the page position, color mode, and intensity.

Press the

button and select

Copy settings

Use the button to set the number of copies, paper source, color mode, then press the

button.

Use the button to select

Others

when adjusting other settings, then press the

button.

Note

• The setting currently specified appears in the selected state.

• Some settings cannot be specified in combination with the setting of other setting items or the copy

menu.

• The settings of the

Intensity: Auto

and print quality are retained even if the printer is turned off.

•

Number of copies

Specify the number of copies.

Ex:

•

Paper source

Select a paper source (rear tray/cassette) where paper is loaded.

Ex:

•

Color mode

Select the color mode for copying (color copy/black & white copy).

•

Others

◦ Two-Sided Copying

288

Summary of Contents for TS7400 Series







































































































































































































































































































































































































































































Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands

Canon TS7400 Series, Online Manual

Search results

Summary of Contents for TS7400 Series

Reviews:

Related manuals for TS7400 Series

Brands by name

Popular brands