Canon TS700 Series Online Manual Download Page 94

Page: 94 / 428

Note

• Align the paper stack with the edge of the cassette as shown in the figure below.

If the paper stack is in contact with the protrusion (G), the paper may not be fed properly.

Slide front paper guide (C) to align it with paper stack.

Align paper guide with where it clicks into place.

Slide right paper guide (D) to align it with paper stack.

Do not slide the paper guide too hard against the paper. The paper may not be fed properly.

Summary of Contents for TS700 Series













































































































































































































































































































































































































































Search results

Summary of Contents for TS700 Series

Reviews:

Related manuals for TS700 Series

Brands by name

Popular brands

Canon TS700 Series, Online Manual

Search results

Summary of Contents for TS700 Series

Reviews:

Related manuals for TS700 Series

Brands by name

Popular brands