Canon TS700 Series Online Manual Download Page 178

Page: 178 / 428

Checking that Power Is On

The

lamp is lit when the printer is turned on.

Even if the LCD is off, if the

lamp is lit, the printer is on.

Note

• It may take a while for the printer to start printing immediately after you turn on the printer.

• The LCD will turn off if the printer is not operated for about 10 minutes. To restore the display, press

any button or perform the print operation.

178

Summary of Contents for TS700 Series













































































































































































































































































































































































































































Search results

Summary of Contents for TS700 Series

Reviews:

Related manuals for TS700 Series

Brands by name

Popular brands

Canon TS700 Series, Online Manual

Search results

Summary of Contents for TS700 Series

Reviews:

Related manuals for TS700 Series

Brands by name

Popular brands