Canon TR8600 Series Online Manual Download Page 47

Page: 47 / 475

Reconfiguration Method of LAN Connection/Reconfiguration
Method of Wi-Fi Connection

Reconfiguration Method of LAN Connection
Reconfiguration Method of Wi-Fi Connection

Reconfiguration Method of LAN Connection

Follow either procedure below to change LAN connection method (wired or Wi-Fi).

•

For Windows:

◦ Click here and redo setup.
◦ Enable Wi-Fi or wired LAN on the operation panel of the printer. After that, perform settings on the

Network Settings

screen on IJ Network Device Setup Utility.

For details, refer to Performing/Changing Wi-Fi Settings or Performing/Changing Wired LAN
Connection (Ethernet Cable) Settings.

•

For macOS:

◦ Click here and redo setup.

Reconfiguration Method of Wi-Fi Connection

Follow either procedure below to change Wi-Fi connection method (infrastructure or Wireless Direct).

•

For Windows:

◦ See Changing the Connection Mode.
◦ Perform settings on the

Network Settings

screen on IJ Network Device Setup Utility.

Important

Before you perform settings using IJ Network Device Setup Utility, turn on Easy WL connect

mode on the printer following the procedure below.

Check that printer is turned on.

Press and hold

(

Wireless connect

) button for 3 seconds.

Using Touch Screen

Perform operations following instructions on your computer, smartphone/
tablet.

If message saying setup is completed appears, select OK.

•

For macOS:

See Changing the Connection Mode.

Summary of Contents for TR8600 Series




























































































































































































































































































































































































































































































Search results

Summary of Contents for TR8600 Series

Reviews:

Canon TR8600 Series, Online Manual, Page: 47 / 475

Search results

Summary of Contents for TR8600 Series

Reviews: