How to View Fax Error Codes
When the service mode #1 SSSW SW01 Bit0 is set to "1" after installing the Fax Board, service error code is output on the
communication management report, reception result report, and error transmission report in the event that the communication is
resulted in an error.
Moreover, when an error occurs, the error code can be checked by performing the following procedure.
Status Monitor/Cancel > Send > Job Log > Details
The error codes displayed on the screen are shown in a list in "User Error Codes" and "Service Error Codes".
For remedies for user error codes, refer to the User's Guide. For remedies for service error codes, refer to "G3/G4 Facsimile Error
Code List (REVISION 2)" (document number: HY8-23A0-020) provided as a separate volume.
4. Error/Jam/Alarm
11
