Service Error Code
Code
Cause
Remedy
##3016
[T/R] An instruction of disconnec-
tion (BYE) was received from the
network at an unexpected time.
Perform a communication again.
*1: G3FAX
*2: IPFAX
No.*1
No.*2
T/R
Description
##100
##3100
[T]
at time of transmission, the procedural signal has been transmitted more than speci-
fied.
##101
##3101
[T/R]
the modem speed does not match that of the other party.
##102
##3102
[T]
at time of transmission, fall-back cannot be used.
##103
##3103
[R]
at time of reception, EOL cannot be detected for 5 sec (15 sec if CBT).
##104
##3104
[T]
at time of transmission, RTN or PIN is received.
##106
##3106
[R]
at time of reception, the procedural signal is received for 6 sec while in wait for the
signal.
##107
##3107
[R]
at time of reception, the transmitting party cannot use fall-back.
##109
##3109
[T]
at time of transmission, a signal other than DIS, DTC, FTT, CFR, or CRP is received,
and the procedural signal has been sent more than specified.
##111
##3111
[T/R]
memory error has occurred.
##114
##3114
[R]
at time of reception, RTN is transmitted.
##116
##3116
[T/R]
Disconnection of loop current was detected during communication.
##200
##3200
[R]
at time of reception, no image carrier is detected for 5 sec.
##201
##3201
[T/R]
DCN is received outside the normal parity procedure.
##204
##3204
[T]
DTC without transmission data is received.
##220
##3220
[T/R]
system error (main program out of control) has occurred.
##223
##3223
[T/R]
while a communication is under way, the line is cut.
##224
##3224
[T/R]
in communication, an error has occurred in the procedural signal.
##226
##3226
[T/R]
the stack printer has fallen outside the RAM area.
##227
##3227
[R]
An attempt was made to record a file without image.
##229
##3229
[R]
the recording unit has remained locked for 1 min.
##230
##3230
[T/R]
A unit for controlling the display has malfunctioned.
##231
##3231
[T/R]
A unit for controlling the Control Panel buttons has malfunctioned.
##232
##3232
[T]
encoding error has occurred.
##237
##3237
[R]
decoding error has occurred.
##238
##3238
[R]
the print control unit is out of order.
##261
##3261
[T/R]
system error has occurred.
##280
##3280
[T]
at time of transmission, the procedural signal has been transmitted more than speci-
fied.
##281
##3281
[T]
at time of transmission, the procedural signal has been transmitted more than speci-
fied.
##282
##3282
[T]
at time of transmission, the procedural signal has been transmitted more than speci-
fied.
##283
##3283
[T]
at time of transmission, the procedural signal has been transmitted more than speci-
fied.
##284
##3284
[T]
at time of transmission, DCN is received after transmission of TCF.
##285
##3285
[T]
at time of transmission, DCN is received after transmission of EOP.
##286
##3286
[T]
at time of transmission, DCN is received after transmission of EOM.
##287
##3287
[T]
at time of transmission DCN is received after transmission of MPS.
##288
##3288
[T]
after transmission of EOP, a signal other than PIN, PIP, MCF, RTP, or RTN has been
received.
##289
##3289
[T]
after transmission of EOM, a signal other than PIN, PIP, MCF, RTP, or RTN has been
received.
4. Error/Jam/Alarm
13
