7. Remove the Face Cover. (The removed parts will not
be used.)
• 1 Screw (used in the next step only in EUR)
• 1 Protrusion
1x
NOTE:
This step is only for Europe.
8. Install the Modular Cover.
• 1 Protrusion
• 1 Screw (use the screw removed in the previous
step)
1x
9. Remove the tape and, install the Fax Unit.
• 2 Protrusions
• 1 Screw (TP; M3x4: Black)
CAUTION:
• Be careful not to damage the [A] part of the
speaker as the wiring may be broken.
• Be sure to tighten the screw while holding the FAX
Unit.
• After tightening the screw of the FAX Unit, check
for any backlash. If there is backlash, tighten the
screw again with the protrusion precisely fitted.
TP; M3x4 (Black)
1x
Protrusion
Protrusion
[A]
10. Connect the 2 cables of the FAX Unit.
• 2 Connectors
2x
6. Installation
58
