2. When the connected options (FEEDER, SORTER, FAX, BOARD) are displayed, select FAX and enter service mode
of this board.
COPIER
FEEDER
SORTER
FAX
SERVICE MODE
LEVEL 1
COPIER: Service mode of the connected equipment
FEEDER: Service mode of the ADF (*)
SORTER: Service mode of the Finisher (*)
FAX: Service mode of the fax (*)
The following explains the operation method using the #1 SSSW screen as an example. The meaning of the keys and
operations are common for all screens.
<1/7>
<READY>
Report
Sssw
Menu Num Ncu Type
IP FAX
Print Clear Test
00000000
10000000
00000000
10000000
00000000
10000000
SW01
SW02
SW03
SW04
SW05
SW06
00000000
10000000
SW07
SW08
OK
Press to accept the current input.
Previous Page/Next Page key
Press to stop the TEST.
• When changing the setting of the bit switch, directly press the bit (numeric value) you want to change.
• To enter a numeric value, use the numeric keypad.
• When confirming a change in a numeric value or when executing an item, press the [OK] key.
• To return to the previous layer, use the [Reset] key.
CAUTION:
When changing the service mode settings, turn OFF and then ON the power.
The details of settings in service mode are stored in the HDD of the host machine. The settings for this board are enabled
by loading the settings stored in the HDD of the host machine to the G3 Fax Control PCB when the main power is turned
ON. Therefore, be sure to turn OFF and then ON the power when the settings have been changed.
5. Service Mode
18