13. Affix the appropriate Modular Label to the place
shown in the figure.
NOTE:
This step is only for Europe.
14. Connect the PTT Plug matched the field or area to
the PTT Cable (6 contact type).
CAUTION:
Do not connect the Telephone Cord (2 contact type)
with the PTT Plug.
1x
15. Connect the end of the PTT Cable or Telephone Cord
to the modular jack on the Host machine, and
connect the other end to the modular jack on the
wall.
1x
16. Connect the Power Plug to the outlet.
17. Turn ON the main power switch.
CAUTION:
If the machine does not recognize this equipment,
unplug and then plug the power plug after turning OFF
the main power switch, or turn OFF the main power
switch and then turn it ON within 20 seconds.
To avoid this symptom, unplug the power plug or turn
the breaker OFF when installing.
NOTE:
After completion of this procedure, proceed to
6. Installation
67
