Canon Staple Finisher-H1, Service Manual

Page: 26 / 82

2
2
2-14
2-14
Technology > Processing Tray Unit > Alignment / Shifting Operation
Technology > Processing Tray Unit > Alignment / Shifting Operation
● Shifting Operation in Non-sort / Sort Mode
(1) After alignment of the sheet stacked on the processing tray lastly, it is shifted according
to the paper width.
• Front / Rear shift position (when the paper width is 210 mm or more)
The shift position is the same as the alignment position
• Front shift position (when the paper width is from 180 mm or more to less than 210
mm)
110mm
Paper (when aligning in the front)
The position that aligns
paper by the front and
rear alignment plates
Middle of Feeding Path
• Rear shift position (when the paper width is from 180 mm or more to less than 210
mm)
85mm
Paper (when aligning in the rear)
The position that aligns
paper by the front and
rear alignment plates
Middle of Feeding Path
F-2-23
F-2-24
• Front shift position (when the paper width is less than 180 mm)
Alignment position
+10mm front side
Paper (when aligning in the front)
Middle of Feeding Path
Alignment position
+10mm front side
• Rear shift position (when the paper width is less than 180 mm)
Paper (when aligning in the rear)
Alignment position
+10mm rear side
Alignment position
+10mm rear side
Middle of Feeding Path
F-2-25
F-2-26