Canon Staple Finisher-H1, Service Manual

Page: 55 / 82

4
4
4-17
4-17
Parts Replacement and Cleaning Procedure > Motors > Removing the Delivery Motor (M2)
Parts Replacement and Cleaning Procedure > Motors > Removing the Delivery Motor (M2)
Removing the Delivery Motor (M2)
1) Remove the rear cover.
(Refer to page 4-7)
2) Remove the E-ring and spring and screw, and then remove the hook and lever.
x1
F-4-34
3) Remove the 2 screws and belt, and then disconnect the connector to remove the delivery motor.
x2
x1
F-4-35
CAUTION:
When attaching the delivery motor, attach the belt with the screws tightened loosely
and then tighten the screws securely at the position where tension is applied to the
belt due to the motor's own weight.
F-4-36