Canon Staple Finisher-H1, Service Manual

Page: 24 / 82

2
2
2-12
2-12
Technology > Processing Tray Unit > Alignment / Shifting Operation
Technology > Processing Tray Unit > Alignment / Shifting Operation
● Alignment Operation in Non-sort / Sort Mode
(1) After lapse of the specified time since detection of paper by the delivery sensor (S2), the
front and rear alignment plates move to the standby position (paper width + 10 mm).
Half of Paper Width
+10mm
Front Alignment Plate
Rear Alignment Plate
Middle of Feeding Path
Half of Paper Width
+10mm
F-2-16
(2) After lapse of the specified time since detection of the trailing edge of paper by the
delivery sensor (S2), the front and rear alignment plates move for paper alignment.
• Front / Rear alignment position (when the paper width is 180 mm or more)
20mm
Rear Alignment Position
Front Alignment Position
20mm
Paper (when aligning in the front)
Paper (when aligning in the rear)
• Alignment position of central reference (when the paper width is less than 180 mm)
10mm
10mm
Paper
Middle of Feeding Path
F-2-17
F-2-18