Canon Staple Finisher-H1, Service Manual

Page: 27 / 82

2
2
2-15
2-15
Technology > Processing Tray Unit > Alignment / Shifting Operation
Technology > Processing Tray Unit > Alignment / Shifting Operation
● Shifting Operation in Staple Mode
(1) After completion of stapling, the paper stack is shifted according to the paper width.
• Front shift position (when the paper width is 210 mm or more)
Half of Paper Width
+10mm
Middle of Feeding Path
The position that aligns
paper by the front and
rear alignment plates
• Rear shift position (when the paper width is 210 mm or more)
Middle of Feeding Path
Half of Paper Width
+10mm
The position that aligns
paper by the front and
rear alignment plates
F-2-27
F-2-28
• Front shift position (when the paper width is less than 210 mm)
110mm
Paper (when aligning in the front)
Middle of Feeding Path
The position that aligns
paper by the front and
rear alignment plates
• Front shift position (when the paper width is less than 210 mm)
85mm
Paper (when aligning in the rear)
The position that aligns
paper by the front and
rear alignment plates
Middle of Feeding Path
F-2-29
F-2-30