Canon Staple Finisher-H1, Service Manual

Page: 22 / 82

2
2
2-10
2-10
Technology > Processing Tray Unit > Alignment / Shifting Operation
Technology > Processing Tray Unit > Alignment / Shifting Operation
The tray auxiliary guide slide-out amount varies depending on the operation mode and paper
length as follows:
Operation Mode Paper Length Amount of Slide Out
Non-Sort / Sort 150 mm or more to less than
217 mm 55 mm
217 mm or more to less than
300 mm 55 + ("Paper Length" - 216) mm
300 mm or more 120 mm
Staple 150 mm or more to less than
217 mm 50 mm
217 mm or more 55 + ("Paper Length" - 216) mm
T-2-4
Alignment / Shifting Operation
The paper stacked on the processing tray is aligned in the width direction by the front and
rear alignment plates. Then, the paper is shifted to the position where it is delivered to the
stack tray.
The front alignment plate is driven by the front alignment motor (M4) and the rear alignment
plate is driven by the rear alignment motor (M5). The home positions of the front and rear
alignment plates are detected by the front alignment plate HP sensor (S4) and rear alignment
plate HP sensor (S5).
Rear Alignment Motor (M5)
Front Alignment Motor (M4)
Rear Alignment Plate
HP Sensor (S5)
Rear Alignment Plate
Front Alignment Plate
HP Sensor (S4)
Front Alignment Plate
F-2-15