Canon Staple Finisher-H1, Service Manual

Page: 25 / 82

2
2
2-13
2-13
Technology > Processing Tray Unit > Alignment / Shifting Operation
Technology > Processing Tray Unit > Alignment / Shifting Operation
● Alignment Operation in Staple Mode
(1) After lapse of the specified time since detection of paper by the delivery sensor (S2),
the front and rear alignment plates move to the standby position (Front alignment plate:
Home po 2 mm; Rear alignment plate: Paper width + 10 mm).
• Standby position of central reference (when the paper width is 200 mm or more)
2mm
Front Alignment Plate Home Position
Half of Paper Width
+10mm
Middle of Feeding Path
• Front standby position (when the paper width is less than 200 mm)
Half of Paper Width
+10mm
Middle of Feeding Path
Half of Paper Width
+10mm
F-2-19
F-2-20
(2) After lapse of the specified time since detection of the paper’s trailing edge by the
delivery sensor (S2), the front and rear alignment plates move to align paper.
• Staple alignment position (when the paper width is 200 mm or more)
2mm
Front Alignment Plate Home Position
The position that aligns
paper by the front and
rear alignment plates
Paper
• Front alignment position (when the paper width is less than 200 mm)
20mm
Paper
F-2-21
F-2-22