129
以下の用紙をセット
Cause 1
Paper of the same size as that specified in the
application software is not loaded in a paper
source.
Solution 1
Load paper of the same size as that specified in
the application software in a paper source.
Solution 2
Press [
] (
オンライン
), and then print to the
currently loaded paper forcibly. If you are using
the multi-purpose tray, the setting for [
手差しトレイ
用紙サイズ
] in the
給紙選択
menu automatically
changes to the paper size specified in the
application.
Cause 2
The paper size specified in the application
software is different from the following setting.
[
手差しトレイ用紙サイズ
] or [
カセット N(N=1、2、
3、4)用紙サイズ
] in the
給紙選択
Menu
Solution
Specify the setting properly.
Cause 3
Improper paper source is selected.
Solution
Specify the setting for [
給紙モード
] in the
給紙選択
menu properly.
IMPORTANT
While <
以
以
以
以下
下
下
下の
の
の
の用
用
用
用紙
紙
紙
紙を
を
を
をセ
セ
セ
セッ
ッ
ッ
ット
ト
ト
ト
> is displayed
If the front cover is opened, the message may
disappear. However, be sure to follow the
directions in the displayed message to change
the paper.
51 印刷設定エラーが発生し
ました。
Cause
The following paper was printed in the Super
Fine mode at 1200 dpi.
Long-size paper
Label
Postcard
Transparency
Heavy paper (129 to 216 g/m
2
)
Coated paper (130 to 220 g/m
2
)
Solution 1
Perform the following procedure.
1. Perform a soft reset.
2. Set [
解像度
] to [
ファイン(600 dpi)
], and then
print again.
Solution 2
Press [
] (
オンライン
) to continue the next
printing. However, the page with which an error
has occurred is not printed.
Message
Cause and Solution