manualshive.com logo in svg

Canon Satera LBP9500C, User Manual

Share
Download
Canon Satera LBP9500C User Manual Download Page 19

18

Paper Which Requires Attention Before Use

Using the following types of paper may cause influence to the printout results or 
printer in some cases.

Paper That Was Stored Poorly

Creased or folded paper

Torn or damaged paper

Wrinkled paper

Curled paper

Wet or moist paper

Paper with rough edges

Irregularly-shaped paper

Paper with Holes or Perforations

Paper with binding holes

Paper with perforations

Paper with Adhesive or a Special Coating

Heat-sensitive paper

Paper with adhesive

Carbon paper

Treated color paper

Specially coated paper (coated paper for ink jet printers, etc.)

Previously Printed Paper

Paper that has already been printed by a copy machine or another printer (The reverse 
side of the paper is also not usable. Using the multi-purpose tray, however, you can 
perform 2-sided printing manually on the other side of paper previously printed by this 
printer. You cannot print on the printed side again.)

Paper That Is Difficult for Toner to Adhere to

Paper with rough surfaces

Paper containing thick fibers

Paper with an extremely rough or smooth surface

Paper that is thicker or thinner than the specified usable paper
See "Paper Type," on p. 11.

IMPORTANT

About paper with staples, clips, ribbons or tape

This kind of paper may result in the printer malfunction or damage to the printer. 

About paper that contains ink that melts, burns, evaporates or emits harmful 
gases at or lower than the heating temperature of the fixing unit

This kind of paper may result in the printer malfunction or damage to the printer. 

Summary of Contents for Satera LBP9500C








































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands